ALPATEC HU 60.1 ET User Manual download pdf (Page 10)

MODE :

• Press mode key (12). Mode function will be alternatively changed from mode I (means constant and

large mist), to mode II (means constant and middle mist), to mode III (means constant and small mist).

TIMER :

• Press timer key (11) to program the appliance on 2 hours, 4 hours, 8 hours or 12 hours.

• If the water tank is empty, waterless light indicator lights on and an alarm sounds.

CLEANING AND MAINTENANCE

• Clean the transducer with descaling detergent. Get out the water tank from the base, empty the base

and drop 10 ml of descaling detergent on the transducer. (See picture below)

• Wait about 2 to 5 minutes then wash with a brush and rinse plentifully with clear water.

• Clean the water tank with a little soft detergent and half of the tank of water. Screw the tank cap and

shake it up and down several times, and then use water to rinse.

• If there is waste left in water flume, clean it with a damp cloth and detergent, then rinse with water.

• If the humidifier has not been working for a long time, clean it as described above.

• Cleaning of the descaling cartridge: take out the cartridge and soak it into salt liquid (one big spoon of

salt in a glass of water) for about 60 minutes. Rinse with clear water and replace in the product.

TRANSDUCER

notice_hu60.1_et 29/03/07 12:21 Page 10

1 2 ... 5 6 7 8 9 10 11 12

No comments

ALPATEC HU 60.1 ET User Manual Page 10